Contacts
Address
Malaysia, Perak, Ipoh, 81, Jalan Johan 1/2, Kawasan Perindustrian Pengkalan 2
Director
Manager
Phones of enterprise
management
+60
When placing an order please inform the manager that you've learned the information on Allbiz! Thank you that you buy on Allbiz!
Internet
Site:
About enterprise
Zhongyang Engineering, Sdn. Bhd.
Zhongyang is one of the largest new and used (second hand) metalworking, fabrication, sheet metal working machinery and machine tools dealers in South East Asia. We pride ourselves in providing quality machinery at affordable prices.
In stock
Shearing thickness 6mm
Shearing width 2500mm
Group: Equipment for metal cutting
In stock
Ram Travel In/Out 1000mm
Drilling Diameter 3"
Spindle Taper MT5
Span Rise & Fall 1400mm
Spindle Speed 30 - 900 RPM, Off 8
Feed Rates 0.08 - 0.75, Off 6
Column & Base Travel 1050mm
Drilling Head Tilting Angle +/- 100°
Drilling Head Swivelling Angle 360°
Column Rotates 360° by 40°...
Group: Equipment for metal cutting
In stock
Between Centres 8'
Center Height 9.5"
Swing In Gap 32"
Spindle Bore Dia 3"
Speeds to 750 rpm
4-way tool post
Overall Dimensions: 4,115 mm (L) x 914 mm (W) x 1,245 mm (H)
Weight approximately 2.5 ton
Group: Equipment for metal working
In stock
Length of rolls 2500mm
Rolling capacity (cold) 19mm (at 1400 diameter)
Prebending capacity (cold) 15mm (at 1400 diameter)
Yield strength 260 N/mm2
Cone capacity by continuous rolling = 60 of prebending thickness
Cone capacity by pressing = 100% of prebending thickness
Top roll diameter...
Group: Metal-working machines
In stock
If you require additional information on this machine or on any other new or used motor (induction motor, ac motor, dc motor, vertical motor, horizontal motor, slip ring motor, squirrel cage motor, drip proof motor, totally enclosed motor, explosion proof motor) that we carry, please let us know....
Group: Driving gears
In stock
Motor Power 7.5 HP
Motor Speed 3000 RPM
3 Phase, 440 Volts
Group: Driving gears
In stock
Capacity 3'6" X 3", 600 Ton
C/W Rotation & Spare Roll
Main Motors: 75kW & 45kW
Below Ground 3'
Overall Dimensions: 7,620 mm (L) x 3,048 mm (W) x 2,896 mm (H)
Weight approximately 40 ton
Group: Metal-working machines
In stock
Type 7077/1
Table size 70" x 86", with 10 tee slots. Table rotates 360 degrees.
Table longitudinal traverse 70", cross traverse 70"
Head stock rise & fall 46"
Table drive motor 15HP x 1500 RPM
Boring head driven motor 20HP x 1500 RPM
Facing head diameter 40", with 7" slide offset...
Group: Metal-working machines
In stock
Table swivels 360 degrees
Between centers 87"
Table traverse: long 5', cross 32", vertical 42"
Spindle diameter 3"
Spindle MT5
Spindle traverse 26"
Chuck diameter 15"
Spindle speeds: 10.1-1540rpm, off 32
Feed rates: 0.0015-0.25 inch/min, off 12
Motor, 2 speeds: 10HP @ 1450rpm, 14HP @...
Group: Metal-working machines
In stock
Between Centers 22"
Swing Over Bed 12"
Swing Over Saddle 7"
Swing In Gap 19"
Spindle Speeds 54-1200 RPM, Off 8
C/w 3 Jaw Chuck
Group: Equipment for metal working